Click on the PDF to download brochure.
Electric / Hydraulic Three PH
MORSØ - EH TURBO
Dust free operation - No compressor needed
Faster and safer than double miter saws
Dust free operation
No compressor needed
Exact 45° degree cut
Noise level below 70dB
MORSØ-EH TURBO is a fully automatic, electric/
hydraulic miter machine with a dual hand
release. This makes the machine completely
safe as it is impossible to operate the machine
and touch the knives at the same time.
It cuts all kinds of wood, plastic, MDF and plywood.
With MORSØ-EH TURBO you achieve a clean,
smooth cut by automatically cutting the
workpiece in minimum two cuts. The cutting
time varies from less than one second and up,
depending on the thickness of the workpiece.
Having finished the cutting, the knife block
automatically returns to the starting position.
The starting position (horizontal movement) is
adjustable up to 60mm/2 1/2” (Maximum width
of workpiece is 100mm/4”). From 60mm and up,
the MORSØ-TURBOH will automatically cut the
workpiece bit by bit. The adjustment is made by
a handle on the front of the MORSØ-EH TURBO.
The vertical movement of the knife block is also
adjustable with three different heights, depending
on the thickness of the workpiece (small, medium
These adjustments allow the MORSØ-EH TURBO
to give you a clean and more constantly accurate cut.
MORSØ-EH TURBO has the same features as the
MORSØ-EH but the cutting cycle on the MORSØEH TURBO is 50% faster.
MORSØ-EH TURBO is CE approved.
MORSØ-EH TURBO is delivered with:
• dual hand release operation
• safety guard
• sliding longitudinal stop
• second stop
• waste chute
• extension table on the left side
• measuring scale up to 1,500 mm/60”
• adjustable fences (45-90°)
• adjustable and automatic rabbet supports
• adjustable hydraulic clamping cylinders
MORSØ-EH TURBO is available either with a single or three
phase motor with voltage set to your requirements.